Living Architecture Fall 2009 Pratt

TIPS FOR TUTORIAL 2

http://www.arch.columbia.edu/work/courses/visual-studies/f09-living-architecture/joseph-hwangbo

1. Firmata 1.0 needs to be uploaded onto the arduino. You can google
for the driver or its on the older versions of Arduino, ie Arduino 12.

2. The baud may need to be changed. Here are two baud rates we
tried: 115200 and 57600. There are other baud rates, like 9600.

3. For the LED's, the two that light up need to be in as said in
tutorial 2 and the LED sensor needs to be in the same way it was as in
tutorial one. You can run tutorial one to make sure the sensor LED is
working correctly, then the other two LED's need to be placed in the
opposite polarity.